Buscar
Mostrando ítems 1-8 de 8
Analysis, Validation and Optimization of the Multi-Stage Sequential Wiredrawing Process of EN AW-1370 Aluminium
(MDPI, 2019)
For the wiredrawing of aluminium, the initial wire rod is obtained by continuous inverted casting. The raw geometry is industrially processed in a linear multi-step wiredrawing sequence to obtain a wire that is commonly ...
Superhydrophobic Cerium-Based Coatings on Al-Mg Alloys and Aluminized Steel
(MDPI, 2019)
Aluminum-magnesium (Al-Mg) alloy and aluminum-coated steel (aluminized steel) are typically used for the manufacturing of baking trays and molds. For these applications, these materials must be modified to develop release ...
Experimental Study for the Stripping of PTFE Coatings on Al-Mg Substrates Using Dry Abrasive Materials
(MDPI, 2020)
Polytetrafluoroethylene (PTFE) coatings are used in many applications and processing industries. With their use, they wear out and lose properties and must be replaced by new ones if the cost of the element so advises. ...
Evaluation of Substrates of Al-Mg and Aluminized Steel Coated With Non-Stick Fluoropolymers after the Removal of the Coating
(MDPI, 2018)
Many trays and pieces of Al-Mg and aluminized steel are used in the food industry. Sometimes these elements have non-stick coatings to solve problems related to the adhesion of masses and food products. With use, the ...
Use of Data Mining Techniques for the Prediction of Surface Roughness of Printed Parts in Polylactic Acid (PLA) by Fused Deposition Modeling (FDM): A Practical Application in Frame Glasses Manufacturing
(MDPI, 2020)
In the present work, ten data mining algorithms have been used to generate models capable of predicting the surface roughness of parts printed on polylactic acid (PLA) by using fused deposition modeling (FDM). The models ...
Manufacturing of Non-Stick Molds from Pre-Painted Aluminum Sheets via Single Point Incremental Forming
(MDPI, 2018)
The process of single point incremental formation (SPIF) awakens interest in the industry of
mold manufacturing for the food industry. By means of SPIF, it is possible to generate short series of
molds or mold prototypes ...
Use of the support vector machine (SVM) algorithm to predict geometrical accuracy in the manufacture of molds via single point incremental forming (SPIF) using aluminized steel sheets
(Elsevier, 2021)
In the present work, the use of the support vector machine (SVM) algorithm is proposed to generate models that allow predicting the geometrical accuracy of molds manufactured via single point incremental forming (SPIF) ...
Non-Stick Coatings in Aluminium Molds for the Production of Polyurethane Foam
(MDPI, 2018)
The manufacturing of polyurethane foam is a process of great industrial importance in the
automotive and furniture sector. The operation of demolding is the most delicate, since the foam
sticks firmly to the walls of the ...