Buscar
Mostrando ítems 1-10 de 12
Aplicación transversal sobre calidad superficial en Ingeniería de fabricación
(UCOPress, 2017)
Se ha fabricado y recubierto una serie de moldes físicos: chapas rectangulares de Al-Mg, con distintos materiales poliméricos que han permitido abarcar distintos puntos de vista de la ingeniería de superficies que se ...
Analysis, Validation and Optimization of the Multi-Stage Sequential Wiredrawing Process of EN AW-1370 Aluminium
(MDPI, 2019)
For the wiredrawing of aluminium, the initial wire rod is obtained by continuous inverted casting. The raw geometry is industrially processed in a linear multi-step wiredrawing sequence to obtain a wire that is commonly ...
Selection of Parameters and Strategies to Reduce Energy Consumption and Improve Surface Quality in EN-AW 7075 Molds Machining
(MDPI, 2018)
The machining of cavities for blow molding is a long and costly process, with the objective
of obtaining an excellent surface finish with the minimal possible electrical energy consumption
(EEC). This work has studied ...
Stripping of PFA Fluoropolymer Coatings Using a Nd:YAG Laser (Q-Switch) and an Yb Fiber Laser (CW)
(MDPI, 2019)
Fluoropolymers such as PFA are used as coatings for the protection of metal substrates due to their high chemical inertia and non-stick properties. These are “wear and tear” coatings and they degrade, at which point they ...
Superhydrophobic Cerium-Based Coatings on Al-Mg Alloys and Aluminized Steel
(MDPI, 2019)
Aluminum-magnesium (Al-Mg) alloy and aluminum-coated steel (aluminized steel) are typically used for the manufacturing of baking trays and molds. For these applications, these materials must be modified to develop release ...
Experimental Study for the Stripping of PTFE Coatings on Al-Mg Substrates Using Dry Abrasive Materials
(MDPI, 2020)
Polytetrafluoroethylene (PTFE) coatings are used in many applications and processing industries. With their use, they wear out and lose properties and must be replaced by new ones if the cost of the element so advises. ...
Evaluation of Substrates of Al-Mg and Aluminized Steel Coated With Non-Stick Fluoropolymers after the Removal of the Coating
(MDPI, 2018)
Many trays and pieces of Al-Mg and aluminized steel are used in the food industry. Sometimes these elements have non-stick coatings to solve problems related to the adhesion of masses and food products. With use, the ...
Study on the Main Influencing Factors in the Removal Process of Non-Stick Fluoropolymer Coatings Using Nd:YAG Laser
(MDPI, 2019)
The coatings with fluoropolymer resins rich in fluorinated ethylene propylene (FEP) and polytetrafluoroethylene (PTFE) are applied as anti-adherent coatings on aluminum–magnesium substrates for use in food containers. In ...
Water-Repellent Fluoropolymer-Based Coatings
(MDPI, 2019)
Fluoropolymer-based coatings are widely used for release applications. However, these hydrophobic surfaces do not reveal a significantly low adhesion. Water repellency incorporated to fluoropolymer coatings might enhance ...
Use of Data Mining Techniques for the Prediction of Surface Roughness of Printed Parts in Polylactic Acid (PLA) by Fused Deposition Modeling (FDM): A Practical Application in Frame Glasses Manufacturing
(MDPI, 2020)
In the present work, ten data mining algorithms have been used to generate models capable of predicting the surface roughness of parts printed on polylactic acid (PLA) by using fused deposition modeling (FDM). The models ...