Decision Support Tool for the Optimal Sizing of Solar Irrigation Systems
Autor
Sarr, Aminata
Mérida García, Aida
Diop, Lamine
Mateos, Luciano
Lamaddalena, Nicola
Rodríguez-Díaz, Juan Antonio
Editor
MDPIFecha
2023Materia
PV energy productionInvestment cost
Greenhouse gas emissions
Sizing optimization tool
Manual and drip irrigation
METS:
Mostrar el registro METSPREMIS:
Mostrar el registro PREMISMetadatos
Mostrar el registro completo del ítemResumen
Solar photovoltaic (PV) irrigation is increasingly used in agriculture, driven by its low operation cost and virtually zero emissions, providing electricity access in rural areas. However, the high investment cost requires an optimal design. The objective of this work was to develop a user-friendly tool to optimally size a PV generator that satisfies crop irrigation needs under local constrictions. The ODSIS (Optimal Design of Solar Irrigation System) tool, was organized in three calculation modules, preceded by two complements, which determine the daily crop irrigation needs and power demand of the pumping system. Then, the first module sizes the PV plant, considering a multiplication factor, and provides the PV production potential throughout each day of the season. The second and third modules evaluate the total investment cost and equivalent greenhouse gas emissions avoided by comparison with traditional energy sources. This tool was applied to a case study in Senegal for which a multiplication factor of 1.4 was obtained for the optimal PV plant size. Between 22% to 64% of the investment cost corresponded to the PV pumping system, depending on the irrigation technique. The use of PV energy in the case study would represent an annual economic saving for the farmer after 5 to 8 years of payback period, avoiding the emission of between 29.8 and 37.9 tCO2eq/year for the case study area.